Start with metered electricity
Find the units consumed on your bill. One unit is one kilowatt-hour (kWh). If you only know the amount paid, Enerlyzer can estimate units by working backward through a selected domestic tariff. Treat that inversion as an estimate: fixed charges, subsidies, duty, arrears and corrections can alter the amount without changing metered energy.
Apply an electricity emission factor
Multiply kWh by an appropriate grid factor in kg CO₂ per kWh. Enerlyzer currently defaults to 0.675 kg CO₂/kWh, documented against the Central Electricity Authority baseline database version 22; the factor is editable. For example, 100 kWh at that factor gives 67.5 kg of estimated electricity-related CO₂. That is a location-based planning calculation, not a certified inventory or a marginal emissions saving.
- Use the period shown on the bill; do not mix a monthly amount with a two-month consumption total.
- Record the factor, source and year alongside the result.
- For a business inventory, define the reporting boundary and follow an applicable accounting standard.
Know the boundary
This estimate concerns electricity generation associated with the selected consumption. It does not include cooking gas, transport, refrigerant leaks, purchased goods, construction, appliance manufacturing or every greenhouse gas. A change in appliance use can reduce the modelled electricity figure, but real-world outcomes depend on use and the electricity supplied.
Turn the estimate into a useful decision
Compare the bill with an appliance inventory, then check unusually large loads against nameplate power and actual operating hours. Use the calculator to test an efficiency or solar scenario, keeping the assumptions visible. Review the full method before treating the figure as a reporting input.