Use the basic formula

Energy in kWh = watts × hours ÷ 1,000. For example, an 80 W fan used for 10 hours consumes an estimated 0.8 kWh that day. Across 30 identical days, that is 24 kWh. To estimate cost, apply the relevant marginal tariff to the change in use rather than assuming every unit is priced alike.

Account for real operating patterns

A label may show rated or maximum input, while actual power changes with speed, mode, thermostat cycling and load. A refrigerator may be powered all day while its compressor runs intermittently. For an air conditioner, set hours and average draw to fit actual use; a generic nameplate calculation can overstate or understate consumption. A plug-in energy meter or reliable appliance data can improve the estimate.

Reconcile, do not double-count

Sum the appliance scenarios, then compare them with the metered bill. The listed devices may explain only part of the total because lighting, pumps, standby loads or shared equipment are missing. Enerlyzer treats the bill as the overall baseline and the appliance list as a breakdown, so the same electricity is not added twice.

Compare a replacement

For two appliances performing the same task, estimate the difference in kWh at the same hours of use. Multiply by an appropriate tariff estimate for possible bill savings, then divide the extra purchase cost by yearly savings for a simple payback. Include maintenance, installation and product lifetime in an actual decision; simple payback alone does not capture them.

Sources and further reading